Eel River Critical Zone Observatory July 2014 Lidar Survey (Angelo)

Welcome Guest ( Sign In )

Overview

This dataset was collected by NCALM for PI Dr. William Dietrich, University of California, Berkeley. The Eel River CZO is a multi-disciplinary research collaborative based at the University of California, Berkeley. CZO research explores how biotic and abiotic factors interact in the near-surface environment (from bedrook to tree tops) and how these relationships impact environmental processes.

The requested survey area consisted of a polygon located 145 km West of Chico, CA. The polygon encloses approximately 57.1 square km. This survey was performed with an Optech Gemini Airborne Laser Terrain Mapper (ALTM) serial number 06SEN195 mounted in a twin-engine Piper PA-31-350 Navajo Chieftain (Tail Number N931SA).

Publications associated with this dataset can be found at NCALM's Data Tracking Center

Platform: Airborne Lidar

Survey Area: 57 km²

Raster Resolution: 1 meter

Survey Date: 07/19/2014 - 07/27/2014

Full Metadata

Data Citation Copied

Use License: CC BY 4.0

Funder: NSF Partner: ERCZO Collector: NCALM

Other Available Data Products: Point Cloud (1064 nm, Angelo)Point Cloud (532 nm/Eel River)Point Cloud (1064nm/Eel River)Raster (Eel River)Raster Bulk Download

1. Select area of data to process:

Usage Heat Map

1. Coordinates

Horizontal Coordinates: NAD83 (2011) / UTM Zone 10N Meters [EPSG: 26910]
Vertical Coordinates: GEOID 12A
Units: meter
Data Selection Coordinates (Select an area on map)

X_min =	Y_min =	X_max =	Y_max =
X_min =	Y_min =	X_max =	Y_max =

Manually enter selection coordinates (in the horizontal coordinate system listed above)

2. Data Output Formats

Select Data Output Format:

3. Layer Types & Additional SRTM Data

Digital Elevation Models (DEMs)

Digital Terrain Model (DTM)
Digital Surface Model (DSM)

Include Global 30m SRTM Data

5. Canopy Height Model (CHM)

Generate Canopy Height Model from DSM and DTM

This algorithm requires both Digital Terrain Model (DTM) and Digital Surface Model (DSM) from step 3 above. To enable DTM and DSM click here

6. Contour Lines

    Generate contour lines
    Output smoothed DEM
    Generate visualization

This algorithm requires either Digital Terrain Model (DTM) or Digital Surface Model (DSM) from step 3 above. To enable DTM/DSM click here

Job Description & Notification

These options allow users to describe and keep track of their jobs. Information entered below is saved along with other job parameters in your personal myOpenTopo dashboard (available only to registered OpenTopography users).

Email address

for notification upon completion of processing

More options

By accessing data via OpenTopography you agree to acknowledge OpenTopography and the dataset source in publications, presentations, and other materials produced using these data:
Data Citation | Use License: CC BY 4.0

Vertical Exaggeration	(in range: [1, 100])
Multidirectional hillshade
Altitude of light source	(in range: [0-90] degrees)
Azimuth of light source	(in range: [0-360] degrees)

DEM Gaussian Radius (pixels)
Contour Interval (meter)

Search form

Eel River Critical Zone Observatory July 2014 Lidar Survey (Angelo)