PG&E Diablo Canyon Power Plant (DCPP): Los Osos, CA Central Coast

Welcome Guest   ( Sign In )

The Diablo Canyon Power Plant (DCPP) Lidar and Imagery datasets are comprised of three separate Lidar surveys: Diablo Canyon (2010), Los Osos (2011), and San Simeon (2013).

The DCPP Los Osos project study area is located in San Luis Obispo County, California, and encompasses approximately 170,000 acres (674.59 square kilometers). Watershed Sciences, Inc. (WSI) collected Light Detection and Ranging (Lidar) data across the project area from 17 March 2011 to 31 March 2011.

The lidar survey utilized a Leica ALS60 sensor in a Cessna Caravan. The Leica system was set to acquire 105,900 laser pulses per second (i.e., 105.9 kHz pulse rate) and flown at 900 meters above ground level (AGL), capturing a scan angle of ±14° from nadir when clouds and terrain permitted. With these flight parameters, the laser swath width is 449m and the laser pulse footprint is 21cm. These settings yield an average native pulse density of ≥8 pulses per square meter over terrestrial surfaces.

This survey was flown as part of the DCPP Long-Term Seismic Program (LTSP). In addition to raster data, Lidar point cloud data are available for this area: Los Osos Point Cloud Data.

1. Select area of data to process:    
  Usage Heat Map
This tauDEM is an advanced processing service. It is available for registered users, who understand these resource intensive algorithms and its products.
In order to access or enable this service, please log in or request an account.
By accessing data via OpenTopography you agree to acknowledge OpenTopography and the dataset source in publications, presentations, and other materials produced using these data:
Data Citation     |     Use License: Not Provided