PG&E Diablo Canyon Power Plant (DCPP): Los Osos, CA Central Coast
OT Collection ID: OT.022013.26910.3
OT Collection Name: PG&E Diablo Canyon Power Plant (DCPP): Los Osos, CA Central Coast
Short Name: CA11_LOS_OSOS
Collection Platform: Airborne Lidar
| Point Cloud Data | Bulk Download | opentopoID: OTLAS.022013.26910.3 | |
| Raster Data | Bulk Download | opentopoID: OTSDEM.022013.26910.3 |
The Diablo Canyon Power Plant (DCPP) Lidar and Imagery datasets are comprised of three separate Lidar surveys: Diablo Canyon (2010), Los Osos (2011), and San Simeon (2013).
The DCPP Los Osos project study area is located in San Luis Obispo County, California, and encompasses approximately 170,000 acres (674.59 square kilometers). Watershed Sciences, Inc. (WSI) collected Light Detection and Ranging (Lidar) data across the project area from 17 March 2011 to 31 March 2011.
The lidar survey utilized a Leica ALS60 sensor in a Cessna Caravan. The Leica system was set to acquire 105,900 laser pulses per second (i.e., 105.9 kHz pulse rate) and flown at 900 meters above ground level (AGL), capturing a scan angle of ±14° from nadir when clouds and terrain permitted. With these flight parameters, the laser swath width is 449m and the laser pulse footprint is 21cm. These settings yield an average native pulse density of ≥8 pulses per square meter over terrestrial surfaces.
This survey was flown as part of the DCPP Long-Term Seismic Program (LTSP). In addition to aerial Lidar data, DEM raster data are available for this area: Los Osos DEMs.
Dataset Acknowledgement: Pacific Gas and Electric Company (PG&E) shall not be held liable for improper or incorrect use of these data. Data and related graphics (e.g., GIF or JPG format files) are not legal documents and are not intended to be used as such. The information contained in the data is dynamic and may change over time. The data are not better than the original sources from which they were derived. It is the responsibility of the data user to use the data appropriately and consistently within the limitations of geospatial data in general and these data in particular. The related graphics are intended to aid the data user in acquiring relevant data; it is not appropriate to use the related graphics as data. PG&E gives no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data. It is strongly recommended that these data are directly acquired from PG&E and not indirectly through other sources which may have changed the data in some way. Although these data have been processed successfully on computer systems by PG&E and its authorized representatives, no warranty expressed or implied is made regarding the utility of the data on other systems for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data.
Dataset Citation: PG&E Diablo Canyon Power Plant (DCPP): Los Osos, CA Central Coast. Distributed by OpenTopography. https://doi.org/10.5069/G9J9649Z . Accessed: 2024-12-21 Copied to Clipboard
Use License: Not Provided
Dataset Keywords: San Luis Obispo County, Los Osos, California, PG&E, Fault, Diablo Canyon Power Plant (DCPP), lidar
Survey Date: 03/17/2011 - 03/31/2011
Publication Date: 02/25/2013
Area: 688 km2
Point Density: 8.93 pts/m2
Classifications:
| Class 1 - Unclassified | 4,204,862,189 |
| Class 2 - Ground | 1,937,383,603 |
Raster Resolution: 1 meter
Coordinate System:
Horizontal: NAD83 (CORS96) / UTM Zone 10N Meters [EPSG: 26910]
Vertical: NAVD88 (GEOID 03) [EPSG: 5703]
Units: meter
Survey Report: Reports
LAS Validation Data Report: CA11_LOS_OSOS.html
Dataset Extent in GeoJSON format:
Point Cloud: CA11_LOS_OSOS.geojson
Raster: CA11_LOS_OSOS.geojson
Dataset Spatial Bounds: North: 35.3739235697235° South: 34.9953273571997° East: -120.413563285068° West: -120.889694535397°