Lidar Survey Along the Calico Fault, CA 2023

Welcome Guest ( Sign In )

Overview

This lidar dataset was collected as part of an NCALM Seed grant for Dannielle Fougere at the University of Southern California. This dataset was collected to help understand the system-level behavior of the Pacific-North American plate boundary fault network in southern California. Data was collected over the section of the Calico fault to the South East of the Rodman Mountains Wilderness Area.

NOTE: NCALM-provided rasters are in different spatial resolutions. The DSM rasters have 100 cm grid spacing, while the DTM rasters have 50 cm spacing.

Platform: Airborne Lidar

Survey Area: 74 km²

Raster Resolution: 0.5 meter

Survey Date: 09/24/2023

Full Metadata

Data Citation Copied

Use License: CC BY 4.0

Funder: NSF Collector: NCALM

Other Available Data Products: Point Cloud Raster Bulk Download

1. Select area of data to process:

Usage Heat Map

1. Coordinates

Horizontal Coordinates: WGS 84 (ITRF2014) epoch 2023.7308 / UTM Zone 11N [EPSG: 32611]
Vertical Coordinates: WGS84
Units: meter
Data Selection Coordinates (Select an area on map)

X_min =	Y_min =	X_max =	Y_max =
X_min =	Y_min =	X_max =	Y_max =

Manually enter selection coordinates (in the horizontal coordinate system listed above)

2. Data Output Formats

Select Data Output Format:

3. Layer Types & Additional SRTM Data

Digital Elevation Models (DEMs)

Digital Terrain Model (DTM)
Digital Surface Model (DSM)

Include Global 30m SRTM Data

5. Canopy Height Model (CHM)

Generate Canopy Height Model from DSM and DTM

This algorithm requires both Digital Terrain Model (DTM) and Digital Surface Model (DSM) from step 3 above. To enable DTM and DSM click here

6. Contour Lines

    Generate contour lines
    Output smoothed DEM
    Generate visualization

This algorithm requires either Digital Terrain Model (DTM) or Digital Surface Model (DSM) from step 3 above. To enable DTM/DSM click here

Job Description & Notification

These options allow users to describe and keep track of their jobs. Information entered below is saved along with other job parameters in your personal myOpenTopo dashboard (available only to registered OpenTopography users).

Email address

for notification upon completion of processing

More options

By accessing data via OpenTopography you agree to acknowledge OpenTopography and the dataset source in publications, presentations, and other materials produced using these data:
Data Citation | Use License: CC BY 4.0

Vertical Exaggeration	(in range: [1, 100])
Multidirectional hillshade
Altitude of light source	(in range: [0-90] degrees)
Azimuth of light source	(in range: [0-360] degrees)

DEM Gaussian Radius (pixels)
Contour Interval (meter)

Search form

Lidar Survey Along the Calico Fault, CA 2023