Jemez River Basin, NM: Post-fire landscape response

Welcome Guest ( Sign In )

Overview

Jemez River Basin, NM: Post-fire landscape response NCALM Project. Jon Pelletier, University of Arizona. The survey area is defined by an 206 square kilometer irregular polygon located 12 kilometers west of Los Alamos, NM. Data were collected from May 25-28, 2012 to quantify extreme post-fire landscape response in the Jemez River basin, New Mexico.There area additional datasets covering the portions of the Catalina-Jemez Critical Zone Observatory (CZO) on OpenTopography including the Jemez River Basin Snow-on LiDAR Survey and Jemez River Basin Snow-off LiDAR Survey.

Publications associated with this dataset can be found at NCALM's Data Tracking Center

Platform: Airborne Lidar

Survey Area: 206 km²

Raster Resolution: 1 meter

Survey Date: 05/25/2012 - 05/28/2012

Full Metadata

Data Citation Copied

Use License: CC BY 4.0

Funder: NSF Collector: NCALM

Other Available Data Products: Point Cloud Raster Bulk Download

1. Select area of data to process:

Usage Heat Map

1. Coordinates

Horizontal Coordinates: NAD83 (2011) / UTM Zone 13N Meters [EPSG: 26913]
Vertical Coordinates: GEOID 09
Units: meter
Data Selection Coordinates (Select an area on map)

X_min =	Y_min =	X_max =	Y_max =
X_min =	Y_min =	X_max =	Y_max =

Manually enter selection coordinates (in the horizontal coordinate system listed above)

2. Data Output Formats

Select Data Output Format:

3. Layer Types & Additional SRTM Data

Digital Elevation Models (DEMs)

Digital Terrain Model (DTM)
Digital Surface Model (DSM)

Include Global 30m SRTM Data

5. Canopy Height Model (CHM)

Generate Canopy Height Model from DSM and DTM

This algorithm requires both Digital Terrain Model (DTM) and Digital Surface Model (DSM) from step 3 above. To enable DTM and DSM click here

6. Contour Lines

    Generate contour lines
    Output smoothed DEM
    Generate visualization

This algorithm requires either Digital Terrain Model (DTM) or Digital Surface Model (DSM) from step 3 above. To enable DTM/DSM click here

Job Description & Notification

These options allow users to describe and keep track of their jobs. Information entered below is saved along with other job parameters in your personal myOpenTopo dashboard (available only to registered OpenTopography users).

Email address

for notification upon completion of processing

More options

By accessing data via OpenTopography you agree to acknowledge OpenTopography and the dataset source in publications, presentations, and other materials produced using these data:
Data Citation | Use License: CC BY 4.0

Vertical Exaggeration	(in range: [1, 100])
Multidirectional hillshade
Altitude of light source	(in range: [0-90] degrees)
Azimuth of light source	(in range: [0-360] degrees)

DEM Gaussian Radius (pixels)
Contour Interval (meter)

Search form

Jemez River Basin, NM: Post-fire landscape response