USFS Summit Springs Lidar, CA 2013

Welcome Guest ( Sign In )

Overview

Lidar was collected over the Mendocino (Summit Springs) area of California on October 23rd 2013 for the USFS Pacific Region. Data were collected to aid the USFS in assessing the topographic and geophysical properties of the study area to support planning and development for fire rehabilitation and restoration effort. This dataset covers 2,933 acres ( 11.87 km²)

Platform: Airborne Lidar

Survey Area: 12 km²

Raster Resolution: 1.0 meter

Survey Date: 10/23/2013

Full Metadata

Data Citation Copied

Use License: CC0 1.0

Funder: USFS Collector: DMI

Other Available Data Products: Point Cloud Raster Bulk Download

1. Select area of data to process:

Usage Heat Map

1. Coordinates

Horizontal Coordinates: NAD83 / UTM Zone 10N Meters [EPSG: 26910]
Vertical Coordinates: NAVD88 (GEOID 12A) [EPSG: 5703]
Units: meter
Data Selection Coordinates (Select an area on map)

X_min =	Y_min =	X_max =	Y_max =
X_min =	Y_min =	X_max =	Y_max =

Manually enter selection coordinates (in the horizontal coordinate system listed above)

2. Data Output Formats

Select Data Output Format:

3. Layer Types & Additional SRTM Data

Digital Elevation Models (DEMs)

Digital Terrain Model (DTM)
Digital Surface Model (DSM)	Digital Surface Model (DSM)	Intensity - DSM

Include Global 30m SRTM Data

5. Canopy Height Model (CHM)

Generate Canopy Height Model from DSM and DTM

This algorithm requires both Digital Terrain Model (DTM) and Digital Surface Model (DSM) from step 3 above. To enable DTM and DSM click here

6. Contour Lines

    Generate contour lines
    Output smoothed DEM
    Generate visualization

This algorithm requires either Digital Terrain Model (DTM) or Digital Surface Model (DSM) from step 3 above. To enable DTM/DSM click here

Job Description & Notification

These options allow users to describe and keep track of their jobs. Information entered below is saved along with other job parameters in your personal myOpenTopo dashboard (available only to registered OpenTopography users).

Email address

for notification upon completion of processing

More options

By accessing data via OpenTopography you agree to acknowledge OpenTopography and the dataset source in publications, presentations, and other materials produced using these data:
Data Citation | Use License: CC0 1.0

Vertical Exaggeration	(in range: [1, 100])
Multidirectional hillshade
Altitude of light source	(in range: [0-90] degrees)
Azimuth of light source	(in range: [0-360] degrees)

DEM Gaussian Radius (pixels)
Contour Interval (meter)

Search form

USFS Summit Springs Lidar, CA 2013