Nantahala NF, NC: Forest Leaf Structure, Terrain and Hydrophysiology

Welcome Guest ( Sign In )

Overview

NCALM Seed. PI: Katherine Windfeldt, University of Minnesota- Twin Cities. The survey area consists of a 64.95 square kilometer polygon, located 15 kilometers south of Franklin, NC. This survey was flown as a part of Seed Money Survey Campaign that took place in Aug-Sept 2009. This section was surveyed on Aug 26, 2009 and was flown out of Macon County airport in Franklin, North Carolina. The data were collected to use lidar data to estimate forest leaf structure, terrain and hydrophysiology in a portion of the Natahala National Forest.

Publications associated with this dataset can be found at NCALM's Data Tracking Center

Platform: Airborne Lidar

Survey Area: 65 km²

Raster Resolution: 1 meter

Survey Date: 08/29/2009

Full Metadata

Data Citation Copied

Use License: CC BY 4.0

Funder: NSF Collector: NCALM

Other Available Data Products: Point Cloud Raster Bulk Download

1. Select area of data to process:

Usage Heat Map

1. Coordinates

Horizontal Coordinates: NAD83 (CORS96) / UTM Zone 17N Meters [EPSG: 26917]
Vertical Coordinates: NAVD88 (GEOID 03) [EPSG: 5703]
Units: meter
Data Selection Coordinates (Select an area on map)

X_min =	Y_min =	X_max =	Y_max =
X_min =	Y_min =	X_max =	Y_max =

Manually enter selection coordinates (in the horizontal coordinate system listed above)

2. Data Output Formats

Select Data Output Format:

3. Layer Types & Additional SRTM Data

Digital Elevation Models (DEMs)

Digital Terrain Model (DTM)
Digital Surface Model (DSM)

Include Global 30m SRTM Data

5. Canopy Height Model (CHM)

Generate Canopy Height Model from DSM and DTM

This algorithm requires both Digital Terrain Model (DTM) and Digital Surface Model (DSM) from step 3 above. To enable DTM and DSM click here

6. Contour Lines

    Generate contour lines
    Output smoothed DEM
    Generate visualization

This algorithm requires either Digital Terrain Model (DTM) or Digital Surface Model (DSM) from step 3 above. To enable DTM/DSM click here

Job Description & Notification

These options allow users to describe and keep track of their jobs. Information entered below is saved along with other job parameters in your personal myOpenTopo dashboard (available only to registered OpenTopography users).

Email address

for notification upon completion of processing

More options

By accessing data via OpenTopography you agree to acknowledge OpenTopography and the dataset source in publications, presentations, and other materials produced using these data:
Data Citation | Use License: CC BY 4.0

Vertical Exaggeration	(in range: [1, 100])
Multidirectional hillshade
Altitude of light source	(in range: [0-90] degrees)
Azimuth of light source	(in range: [0-360] degrees)

DEM Gaussian Radius (pixels)
Contour Interval (meter)

Search form

Nantahala NF, NC: Forest Leaf Structure, Terrain and Hydrophysiology