Lidar Survey of Dump Creek, ID 2019

Welcome Guest ( Sign In )

Overview

This lidar survey of Dump Creek, ID was collected for Brian Yanites at Indiana University, Bloomington in order to quantify the impact of a late 19th century drainage diversion on landscape processes. The rerouting of Moose Creek to Dump Creek resulted in the river channel widening and undercutting the proximal valley walls, initiating scores of landslides. The data will be used to map the channel morphology, landslides, and tension cracks that continue to propagate across this landscape over a century after the drainage diversion. Data was collected in September 2019 at Dump Creek, northwest of Salmon, Idaho.

Publications associated with this dataset can be found at NCALM's Data Tracking Center

Platform: Airborne Lidar

Survey Area: 43 km²

Raster Resolution: 1.0 meter

Survey Date: 09/23/2019

Full Metadata

Data Citation Copied

Use License: CC BY 4.0

Funder: NSF Collector: NCALM

Other Available Data Products: Point Cloud Raster Bulk Download

1. Select area of data to process:

Usage Heat Map

1. Coordinates

Horizontal Coordinates: NAD83 (2011) (EPOCH:2010) / UTM Zone 12N Meters [EPSG: 6341]
Vertical Coordinates: Ellipsoid
Units: meter
Data Selection Coordinates (Select an area on map)

X_min =	Y_min =	X_max =	Y_max =
X_min =	Y_min =	X_max =	Y_max =

Manually enter selection coordinates (in the horizontal coordinate system listed above)

2. Data Output Formats

Select Data Output Format:

3. Layer Types & Additional SRTM Data

Digital Elevation Models (DEMs)

Digital Terrain Model (DTM)
Digital Surface Model (DSM)

Include Global 30m SRTM Data

5. Canopy Height Model (CHM)

Generate Canopy Height Model from DSM and DTM

This algorithm requires both Digital Terrain Model (DTM) and Digital Surface Model (DSM) from step 3 above. To enable DTM and DSM click here

6. Contour Lines

    Generate contour lines
    Output smoothed DEM
    Generate visualization

This algorithm requires either Digital Terrain Model (DTM) or Digital Surface Model (DSM) from step 3 above. To enable DTM/DSM click here

Job Description & Notification

These options allow users to describe and keep track of their jobs. Information entered below is saved along with other job parameters in your personal myOpenTopo dashboard (available only to registered OpenTopography users).

Email address

for notification upon completion of processing

More options

By accessing data via OpenTopography you agree to acknowledge OpenTopography and the dataset source in publications, presentations, and other materials produced using these data:
Data Citation | Use License: CC BY 4.0

Vertical Exaggeration	(in range: [1, 100])
Multidirectional hillshade
Altitude of light source	(in range: [0-90] degrees)
Azimuth of light source	(in range: [0-360] degrees)

DEM Gaussian Radius (pixels)
Contour Interval (meter)

Search form

Lidar Survey of Dump Creek, ID 2019