Slip transfer through the Eastern Transverse Ranges, CA 2017

Welcome Guest ( Sign In )

Overview

This dataset, located within Joshua Tree National Park, CA, was collected as an NCALM Seed grant for Katherine Anna Guns, University of Arizona, Geosciences Department to support an investigation of possible slip rates on the Southern San Andreas Fault through the Eastern Transverse Ranges. The requested survey area is located approximately 31 km east of Palm Springs, CA. The polygon encloses approximately 64 km².

Publications associated with this dataset can be found at NCALM's Data Tracking Center

Platform: Airborne Lidar

Survey Area: 64 km²

Raster Resolution: 1 meter

Survey Date: 03/18/2017

Full Metadata

Data Citation

Use License: CC BY 4.0

Funder: NSF Collector: NCALM

Other Available Data Products: Point Cloud, Raster Bulk Download (Sign in required)

1. Select area of data to process:

Usage Heat Map

1. Coordinates

Horizontal Coordinates: NAD83 (2011) / UTM Zone 11N Meters [EPSG: 26911]
Vertical Coordinates: NAVD88 (GEOID 12B) [EPSG: 5703]
Units: meter

Data Selection Coordinates: Manually enter selection coordinates (in the horizontal coordinate system listed above)

X_min =	Y_min =	X_max =	Y_max =
X_min =	Y_min =	X_max =	Y_max =

2. Data Output Formats

Select Data Output Format:

3. Layer Types & Additional SRTM Data

Digital Elevation Models (DEMs)

Digital Terrain Model (DTM)
Digital Surface Model (DSM)

Include Global 30m SRTM Data

5. Canopy Height Model (CHM)

Generate Canopy Height Model from DSM and DTM

This algorithm requires both Digital Terrain Model (DTM) and Digital Surface Model (DSM) from step 3 above. To enable DTM and DSM click here

6. Contour Lines

    Generate contour lines
    Output smoothed DEM
    Generate visualization

DEM Gaussian Radius (pixels)
Contour Interval (meter)

File output type

This algorithm requires either Digital Terrain Model (DTM) or Digital Surface Model (DSM) from step 3 above. To enable DTM/DSM click here

7. Hydrologic Terrain Analysis Products (tauDEM):

This tauDEM is an advanced processing service. It is available for registered users, who understand these resource intensive algorithms and its products.
In order to access or enable this service, please log in or request an account.

Job Description

These options allow users to describe and keep track of their jobs. Information entered below is recorded along with other job parameters in your personal lidar job archive accessed via myOpenTopo (available only to registered OpenTopography users).

Job title (up to 150 characters)

Job description (up to 750 characters)

Enter your e-mail address
for notification upon completion of processing

By accessing data via OpenTopography you agree to acknowledge OpenTopography and the dataset source in publications, presentations, and other materials produced using these data:
Data Citation | Use License: CC BY 4.0

Vertical Exaggeration	(in range: [1, 100])
Multidirectional hillshade
Altitude of light source	(in range: [0-90] degrees)
Azimuth of light source	(in range: [0-360] degrees)

Search form

Slip transfer through the Eastern Transverse Ranges, CA 2017