These files contain topographic lidar data classified as ground (2) and unclassified (1) in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. These data were collected by the Compact Hydrographic Airborne Rapid Total Survey (CHARTS) system along the coast of Florida. CHARTS integrates topographic and bathymetric lidar sensors, a digital camera and a hyperspectral scanner on a single remote sensing platform for use in coastal mapping and charting activities. Data coverage generally extends along the coastline from the waterline inland 500 meters (topography) and offshore 1,000 meters or to laser extinction (bathymetry). The topographic lidar sensor has a pulse repetition rate of 9 kHz at 1064 nm (near-infrared wavelength). The bathymetric lidar sensor has a pulse repetition rate of 1 kHz at 532 nm (green wavelength). Native lidar data is not generally in a format accessible to most Geographical Information Systems (GIS). Specialized in-house and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis. The 3-D position data are sub-divided into a series of LAS files, each covering approximately 5 kilometers of shoreline. The file index is provided by the shape file, "FL_Boxes.shp", and the numbers used to identify files are in the "Box" field of the shape file. The LAS file naming convention is based on the year, project, area name, "Box," and the product type. An example file name is "2009_NCMP_FL_NewInlet_229_GeoClassified.las", where 2009 is the year of data collection, NCMP is the project under which data were collected, FL_NewInlet is the area of data collection, 229 is the "Box" number and "GeoClassified" is the product type. The format of the file is LAS version 1.0. In addition to the lidar point data, topobathy bare earth Digital Elevation Models (DEMs) at a 1 meter grid spacing, created from the lidar point data are also available from the NOAA Digital Coast. The link to this data is provided in the URL section of this metadata record. DEMs at a 1 meter grid spacing, created from all classifications, are available by request at coastal.info@noaa.gov. This data set is an LAZ (compressed LAS) format file containing LIDAR point cloud data.