This is a subset of data covering Alabama counties of Choctaw and Washington. The full collection data set is comprised of lidar point cloud data, raster DEM, hydrologic 3-d breaklines, raster intensity, survey control, project tile index, and project data extent. This task order requires lidar data to be acquired in two separate AOI's over 10 counties in Mississippi; Attala, Leake, Lexington, Montgomery, Scott, Smith, Webster Counties and a portion of Carroll, Choctaw and Jasper Counties and two counties in Alabama; Washington and Choctaw. AOI is approximately 7,400 square miles. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, one (1) meter pixel raster DEMs of the bare-earth surface in ERDAS IMG Format, and 8-bit intensity images. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, control data, tile index, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format, and LAS swath data. Collected swath files that were that were larger than 2GB were provided in multiple sub-swath files, each less than 2GB. Ground conditions: Water at normal levels; no unusual inundation; no snow; leaf off. This metadata record only covers the classified LAS data. Contract Information: TASK NAME: USGS-NRCS Laurel MS 0.7m NPS LIDAR Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No. G13PD01086 Woolpert Order No. 073741 CONTRACTOR: Woolpert, Inc. This data set is an LAZ (compressed LAS) format file containing LIDAR point cloud data.