WSI collected Light Detection and Ranging (LiDAR) data of the Green Peter study area for the Oregon LiDAR Consortium (OLC) in Linn County, Oregon. The collection of high resolution geographic data is part of an ongoing pursuit to amass a library of information accessible to government agencies as well as the general public. Between September 21st and November 27th, 2012 , WSI employed remote-sensing lasers in order to obtain a total area flown of 218,464 acres. Settings for LiDAR data capture produced an average resolution of at least eight pulses per square meter. The LiDAR survey utilized a Leica ALS60 mounted in either a Cessna Caravan 208B or a Partenavia P.68 aircraft. The systems were programmed to emit single pulses at 105 kHz and flown at 900 m AGL, capturing a scan angle of 30 degrees from nadir. These settings were developed to yield points with an average native density of greater than eight pulses per square meter over terrestrial surfaces. The study area was surveyed with opposing flight line side-lap of greater than 60% with at least 100% overlap to reduce laser shadowing and increase surface laser painting. The system allows up to four range measurements per pulse, and all discernible laser returns were processed for the output dataset. Final products included lidar point cloud data, one-meter digital elevation models of bare earth ground model and highest-hit returns, intensity rasters, study area vector shapes, and corresponding statistical data. Final deliverables were projected in Oregon Statewide Lambert Conformal Conic. Lidar point clouds were projected back to geographic coordinates for storage in the Digital Coast Data Access Viewer. Original contact information: Contact Name: Jacob Edwards Contact Org: DOGAMI Phone: 971-673-1557 Email: jacob.edwards@oregon.gov This data set is an LAZ (compressed LAS) format file containing LIDAR point cloud data.