This lidar point data set was collected during low tide conditions along an approximately 500-700 meter wide strip of the Southern California coastline within an area extending south from Long Beach to the US/Mexico border. Data were collected in Los Angeles, Orange and San Diego counties from south of the Downtown Long Beach Marina in Long Beach, California to north of Oceanside on March 28, 2007 between 18:54 and 22:01 UTC. Data were collected in Orange and San Diego counties from south of Dana Point to south of the United States-Mexico border near Playas de Tijuana, Baja California, Mexico on March 29, 2007 between 19:08 and 22:00 UTC. Data set features include water, beach, cliffs, and top of cliffs. The all points data set contains the complete point cloud of first and last return elevation and laser intensity measurements recorded during the spring 2007 airborne lidar survey conducted semi-annually by the University of Texas at Austin for the Southern California Beach Processes Study. The data set was generated by the processing of laser range, scan angle, and aircraft attitude data collected using an Optech Inc. Airborne Laser Terrain Mapper (ALTM) 1225 system and geodetic quality Global Positioning System (GPS) airborne and ground-based receivers. Instrument settings and parameters during survey were: Nominal on-ground beam diameter: 25 cm Pulse rate: 25 kHz Maximum number of returns recorded: 2 Minimum separation between detected returns from a single pulse: 4.3 m Laser wavelength: 1064 nm Frequency of GPS sampling: 1 Hz Frequency of IMU sampling: 50 Hz; Scan angle: +/- 20 degrees Nominal height of instrument above ground: 1100 m Nominal single-swath pulse density: 2 m Nominal aggregate pulse density: 0.75 Nature of vertical control: Kinematic and static GPS points Original contact information: Contact Name: Roberto Gutierrez Contact Org: The University of Texas at Austin Center for Space Research Title: Research Associate in Geodesy and Geophysics Phone: 512.471.5573 Email: oskar@mail.utexas.edu This data set is an LAZ (compressed LAS) format file containing LIDAR point cloud data.