This report pertains to a Specific Purpose LiDAR Survey of Nassau County, Florida. The LiDAR aerial acquisition was conducted by Terrapoint USA between August 18, 2007 and September 4, 2007, and the breaklines and contours were subsequently generated by Dewberry. The PDS team is under contract HS-34-14-00-22-469 with the Florida Division of Emergency Management (FDEM) and offered LiDAR and derived products as an add-on agreement with Nassau County at the same rates as negotiated for the FDEM contract and utilizing the same Baseline Specifications from FDEM. The LiDAR dataset of Nassau County was acquired by Terrapoint USA and processed to a bare-earth digital terrain model (DTM) in accordance with FDEM Baseline Specifications. Detailed breaklines and contours were also produced by the PDS team. Each tile covers an area of 5000 ft by 5000 ft. The FDEM Baseline Specifications require a maximum LiDAR post spacing of 4 feet, i.e., an average point density of less than 1 point per square meter. However, the PDS team required a much higher point density of its subcontractors in order to increase the probability of penetrating dense foliage; with nominal post spacing of 0.7 meters per flight line and 50% sidelap between flight lines, the average point density is 4 points per square meter with higher point density there is a greater probability of penetrating dense vegetation and minimizing areas defined as "low confidence areas." LiDAR was delivered as a point cloud in LAS 1.1 format. Original contact information: Contact Org: Florida DEM Phone: 850-413-9907 Email: gis@dca.state.fl.us This data set is an LAZ (compressed LAS) format file containing LIDAR point cloud data.