These data were collected for the USACE New England District (NAE). The data set is made up of 13 small projects in Connecticut. These projects are: Bridgeport, Connecticut River, Duck Island, Milford Harbor, New Haven, Saybrook Jetties, Sear Shoals Dike, Shelton, Southport Harbor, Stamford Harbor, Stonington, Thames River, Westport Harbor. These files contain classified topo/bathy lidar data. Data are classified as 1 (valid non-ground topographic data), 2 (valid ground topographic data), and 29 (valid bathymetric data). Classes 1 and 2 are defined in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. These data were collected by the Coastal Zone Mapping and Imaging Lidar (CZMIL) system. CZMIL integrates a lidar sensor with simultaneous topographic and bathymetric capabilities, a digital camera and a hyperspectral imager on a single remote sensing platform for use in coastal mapping and charting activities. Native lidar data is not generally in a format accessible to most Geographic Information Systems (GIS). Specialized in-house and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis. In addition to the lidar point data, topobathy bare earth Digital Elevation Models (DEMs), at a 1 meter grid spacing, created from the lidar point data are also available. These data are available for custom download here: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=6262 DEMs that were created from all classes of points (1, 2, 29) at a 1 meter grid size are available by request via email at: coastal.info@noaa.gov. These products have not been reviewed by the NOAA Office for Coastal Management (OCM) and any conclusions drawn from the analysis of this information are not the responsibility of NOAA or OCM. Original contact information: Contact Org: JALBTCX Title: Data Production Manager Phone: 228-252-1131 Email: JALBTCX@usace.army.mil This data set is an LAZ (compressed LAS) format file containing LIDAR point cloud data.