Watershed Sciences, Inc. collected Light Detection and Ranging (LiDAR) data for the Sandy River study area in collaboration with the USDA Forest Service. The areas for LiDAR collection have been designed as part of a collaborative effort of state, federal, and local agencies in order to meet a wide range of project goals. This LiDAR data set was collected Sept 29 - Oct 1, 2008 and falls mainly in Multnomah County, but also in small portions of Clark and Clackamas Counties, Oregon. This data set consists of bare earth and unclassified points. The average pulse density is 8.04 pulses per square meter over terrestrial surfaces. The area of interest (AOI) encompasses approximately 34,021 acres and the total area flown (TAF) covers 35,873 acres. The TAF acreage is greater than the original AOI acreage due to buffering and flight planning optimization. In some areas of heavy vegetation or forest cover, there may be relatively few ground points in the LiDAR data. Elevation values for open water surfaces are not valid elevation values because few lidar points are returned from water surfaces. Lidar intensity values were also collected. Original contact information: Contact Name: Ian Madin Contact Org: DOGAMI Phone: 971-673-1542 Email: ian.madin@dogami.state.or.us This data set is an LAZ (compressed LAS) format file containing LIDAR point cloud data.