Original Data: These files contain topographic lidar elevations generated from data collected using a Teledyne ALTM Galaxy PRIME sensor. Native lidar data is not generally in a format accessible to most Geographic Information Systems (GIS). Specialized in-house and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis. Horizontal positions, provided in decimal degrees of latitude and longitude, are referenced to the North American Datum of 1983 National Adjustment of 2011 (NAD83 (2011)). Vertical positions are referenced to the NAD83 (2011) ellipsoid and provided in meters. The 3-D position data are sub-divided into a series of LAS files, which are tiled into 1-km by 1-km boxes defined by the Military Grid Reference System. The data were provided to the NOAA Office for Coastal Management (OCM) by the USACE Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX) to make the data publicly available for bulk and custom downloads from the NOAA Digital Data Access Viewer (DAV). This data set contains point cloud data(' in LAZ (compressed LAS) format', ''). The data may have been reprojected or otherwise modified from the original data in an automated process. Disregard projection information in this abstract and refer to the spatial reference section.